Click to expand for Product Details below.
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
SPRMC 808 S-11B |
Low Dosage Water reducer- plasticizer with retarding effect. |
View TDS |
| 2.) |
SPRMC RS 15 |
Water Reducer Plasticizer admixture with slump retention capabilities. |
View TDS |
| 3.) |
SPRMC R 305 |
High Range Water Reducer cum Retarder- Superplasticizer for highly workable concrete at low water content. |
View TDS |
| 4.) |
SPRMC APC-1000 |
Polycarboxylate based hyper-plasticizer admixture |
View TDS |
| 5.) |
SPRMC APC-1000F
(modified end polycarboxylates) |
An Accelerator-Hyper plasticizer; which enhances the workability at extremely low water content concrete, and increases the rate of hydration of the cement, so as to obtain a much rapid increase in strength. |
View TDS |
| 6.) |
SPRMC R-310 |
Polycarboxylate based hyper plasticizer having very high flow properties requiring little to no vibration for Self Compacting Concrete. |
View TDS |
| 7.) |
SPRMC R244 |
High Range Water Reducer – Super Plasticizer cum retarder
admixture which retains the workability of concrete. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
Master Plaster MPCS 101 |
Internal Plaster Admixture (Compatible for River Sand and Crushed sand plastering) |
View TDS |
| 2.) |
Master Plaster MPCS 102 |
Internal & External Plaster Admixture (Compatible for River Sand and Crushed stone sand plastering) |
View TDS |
| 3.) |
MPSC 707 |
Integral curing Additive for Internal & External Plasters, Masonry Mortar & Other cementatious mortars. MPSC-707 is compatible with crushed stone sand, m-sand, etc.
Cementatious Mortars prepared using Razon MPSC-707 do not require water curing. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
IWSP – 102 |
Increases workability at reduced water cement ratio hence suppressing bleeding and segregation giving water-proof concrete |
View TDS |
| 2.) |
Integral Water Proofer (Liquid/Powder) |
Admixture for integral water proofing |
View TDS |
Sr. No.
|
Product Name
|
Product Application
|
Technical Data Sheet
|
| 1.) |
Master Mortar MM 101B |
Retains workability of mortars
without the necessity of re-tempering with
water. Ensuring a dense, cohesive,
durable, high strength cement-sand matrix. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
VTNB-E9 |
Rapid Hardener for manufacture of dry mix concrete products |
View TDS |
| 2.) |
VTNB A-1 |
Superplasticizer for manufacture of dry mix concrete products |
View TDS |
| 3.) |
BM-4 |
Accelerator cum plasticizer for Cement Concrete blocks |
View TDS |
| 4.) |
SuperPlasticizer RS PSC-1 |
Highly efficient admixture for steam/mist/heat cured concrete manufacturing. Increases compressive strength and workability at lower water cement ratios. Helps in reducing cement consumption without adverse effect on strength. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
Pipe Master-101 |
Admixture to provide workability, cohesion, finish & strength in Vertical – vibration cast concrete pipes. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
Colgrout CG-101S |
Premium quality Colgrout admixture |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
INTRAIR (A.E.A.) 120N |
Chloride and sulphate free liquid admixture for air entraining. It improves workability of concrete mortar. |
View TDS |
| Sr. No. |
Product Name |
Product Application |
Technical Data Sheet |
| 1.) |
ACCELARATOR A 11 & CATALAST FS 100 |
Enables 100% strength within 24 hours after
placing of concrete. |
View TDS |
| 2.) |
SPRMC APC-1000F
(modified end polycarboxylates) |
An Accelerator-Hyper plasticizer; which enhances the workability at extremely low water content concrete, and increases the rate of hydration of the cement, so as to obtain a much rapid increase in strength. |
View TDS |
