Today the demand of cementatious grout/ non shrink grout is high and the prices have grown very competitive. Quality is key, yet purchasers are not giving the befetting prices for the grout. In such a market, you have to provide a good quality grout at low prices, the only way to achieve it is by using RAZONs polymer TOR 3130 for your manufacturing process.
To get good grouting cement, a high performance polymer is necessary, and it should consistently perform in its optimal range so that the customer gets good quality and you get repeat orders as well as good profits.
The successful FORMULATION of non shrink grout consists of three important raw materials:-
- Cement,
- Sand
- Correct Polymers in the correct proportions
Cement and sand is abundantly available and majorly in your viscinity and they are not much technical. Which brings us to the most important ingredient- the polymer. Nite that the right sourcing of polymers is very critical because your product performance depends directly upon the quality, fineness, dosage, solubility, type and molecular weight of the polymers.
At first, it may seem as insignificant, however the only seperating line between manufacturing an average quality and product and a great product it’s the polymer. When you switch to TOR 3130 you will see that it makes a world of a difference.
The polymers of TOR 3130 are developed in such a way so as to give you:-
- Improved Work ability
- Non shrink properties
- Adequate Pot life
- Higher Bond strength
- Higher Tensile strengths
- Very high Compressive strengths
- Much better hardness and toughness
- And most importantly the addition of TOR 3130 optimizes strenghts at all ages to deliver a premium quality product at economic raw material costs
Using TOR 3130 you will be able to use basic raw materials in such a fashion that your end product will be profitable as well as of premium quality.
- TOR 3130 polymer is designed for use to manufacture top quality products like:-
- non shrink grout
- grouting cement
- ready mix concrete
- Grouting cement
- Repair mortar for structural as well as cosmetic repairs of concrete
- Self compacting screeds
- Self levelling cementatious topping mortars
And repeat orders with good profitability will be the feather in your hat.
The dosage of TOR 3130 typically depends upon the cement type of sand. Dosage of TOR 3130 can be adjusted at your end, after a few basic lab trials.
- As a general starting point formulation the proportions are below:-
- Cement – 300 kgs
- Sand – 700 kgs
- AMP-68 – 20-40 kgs
Many major manufacturers and SME plants across India confidently use TOR 3130 as a raw material over the last so many years. They are pleased with the quality and timely delivery of TOR 3130 and their customers are pleased with the superior performance and affordable prices.
Another advantage that TOR 3130 provides is that it has low investment lock up, and low logistics impact.
For quotes or more details, you can send us your enquiry by filling out the enquiry form by clicking here, mention TOR 3130 in the subject line or call now on +91-9881494979
Below is typical results and properties obtained by using TOR 3130 in your formulation Vs your regular polymers
| No | Property | ORDINARY ADDITIVE MORTAR | TOR 3130 ENRICHED MORTAR |
| 1 | Pot life | 30 mins | 45 minutes hours |
| 2 | Compressive strenght 24 hours | 5-7 MPa | 20 MPa |
| 3 | Compressive strenght 7 days | 20 MPa | Upto 40 MPa |
| 4 | Compressive strenght 28 days | 30 MPa | Upto 60 MPa |
| 5 | Tensile Strength | Upto 0.3 N/mm2 | Upto 1 N/mm2 |
| 6 | Flexural strenght | 3 MPa | 6-7 MPa |
FOR POLYMERS TO MANUFACTURE AAC BLOCK ADHESIVE OR TYPE 1/ TYPE 2/ TYPE 3 TILE ADHESIVE- CLICK HERE
FOR SBR LATER POLYMER –CLICK HERE