AMP-68 / Polymer raw material

Want to make high quality AAC block mortars & tile adhesives at the lowest costs?

A successful, consistent-quality AAC block mortar and tile adhesive formulation is based on the polymer. And that’s AMP‑68, India’s most trusted polymer.

An installer fitting a large wall tile onto adhesive
Illustrative industry image.
01

What do you need?

Your application and performance target

Working time, handling, bonding and water retention each affect how an adhesive performs during installation. AMP-68 is Razon’s polymer raw material for developing AAC jointing mortars and tile adhesives. Choose the question closest to your formulation.

01
AAC block jointing

Developing a jointing mortar?

Evaluate AMP-68 in Razon’s published cement-and-sand starting formulation.

02
Tile adhesive

Developing a tile adhesive?

Razon positions AMP-68 for Type 1, 2, 3 and 4 formulations; validate the complete adhesive.

What’s more important: cement or sand?

Quality analysis is the most important part of manufacturing dry mix mortars.

Request a mix design

02

Why Razon AMP-68 polymer?

Ordinary mortar / AMP-68

The secret to the success of many reputed manufacturers is the right mix with the right ingredients.

Build demand for your product with characteristics defined by ASTM and IS, and make a good profit with the economy that AMP-68 delivers. Exceed industry demands with the performance below.

Six manufacturer-published comparisons of ordinary additive mortar and AMP-68 enriched mortar
Property Ordinary additive With AMP-68
Pot life 45 minutes 2 hours
Trowellability ++ ++++
Bond strengthN/mm² 0.3–0.5 >1
Tensile strengthN/mm² Up to 0.3 Up to 1
Compressive strengthN/mm² Up to 3 Up to 8
Cost ++++ +++
What the polymer contributes

Razon identifies polymer quality, fineness, dosage, solubility, type and molecular weight as factors that influence the finished adhesive.

Workability and retention

AMP-68 is developed for improved handling, trowellability and retention during application.

Pot life

The published comparison reports two hours for AMP-68-enriched mortar against 45 minutes for ordinary-additive mortar.

Strength and toughness

Razon positions the polymer for improved bond and tensile strengths, hardness and toughness.

Cement optimisation

Evaluate cement consumption and raw-material cost alongside the performance requirements of the finished product.

Compare it with your current system

Evaluate an AMP-68 sample with your own cement, sand and application requirements.

Request an AMP-68 sample or mix design

03

Build a successful formulation

Cement + sand + AMP-68

AMP-68 is the polymer raw material and the spice to your formulation. To achieve a superior-quality product, start with these published proportions and run trials using your own materials if you have the lab equipment. If not, request a mix design with test reports.

Cement300kg
Sand700kg
AMP-6820–40kg
1,000 kg cement + sand base1,020–1,040 kg total dry material
Formulation notes

Mixing water, cement grade, sand specification and mixing procedure are not specified in the published formula. Establish these for your materials and intended application.

Polymer quality, fineness, solubility, type and molecular weight also affect the finished adhesive. Check workability, pot life and required strengths before production.

04

Applications

AAC block jointing & tile adhesives

Razon positions AMP-68 for Type 1, 2, 3 and 4 tile adhesive formulations. Validate the complete adhesive against the applicable requirements of IS 15477:2019.

05

From lab trial to production to market share

Formulation development & supply

With Razon AMP-68, design and manufacture a product that satisfies your customers’ quality requirements, gives you a competitive supply price and, most importantly, a healthy margin.

Razon’s AMP-68 is used by major manufacturers and SME plants across India to produce successful, consistent products.

01

Select your materials

Use the cement and sand planned for production so the trial represents your actual system.

02

Prepare the adhesive

Use your equipment to prepare the adhesive with the selected materials and mixing parameters.

03

Test the adhesive

Confirm workability, pot life and the required strengths for the intended application.

04

Supply

Plan AMP-68 supply, inventory requirements and raw-material economics for production.

Working on an existing formulation?

Share your raw materials, application and the property you want to improve.

Discuss your formulation

06

Common questions

AMP-68 / before production

What is AMP-68?

It’s a polymer designed for manufacturing top-quality AAC block adhesives and tile adhesives.

Is 300 kg cement + 700 kg sand + 20-40 kg AMP-68 a production-ready recipe?

This is a starting formulation that can be optimised for quality and economy.

Request optimised proportions

What is the cost of AMP-68?

For current pricing, fill in the enquiry form to request a quote.

Request current pricing

What is the shelf life of AMP-68?

12 months, guaranteed. However, our customers buy every month.

Can Razon help with an existing formulation?

Yes. Fill in the enquiry form to discuss your existing formulation.

Discuss your formulation

LET’S TALK

Ready to make the best quality at the lowest price?

Want help with formulating your product?

Already a user? Ask us for other raw materials for construction chemicals.

Your goal (select at least one)

Enable JavaScript to use the enquiry form, or contact Razon on WhatsApp.