RAZON POZZOMIX is obtained from collection by electrostatic precipitators after combustion of pulvurised coal. It is considered the most effective pozzolanic material, providing cement replacement in most concretes and factory prepared ready to use mortars, grouts etc.
- Use of POZZOMIX ensures
- better workability
- waterproof characteristics,
- reduced plastic shrinkage,
- lower water content
- cohesiveness
- resistance to sulfate attack,
- better results in RCPT &
- lower heat of hydration is which is most crucial in our arid climates of middle east.
Use of POZZOMIX facilitates upto 30% replacement of cement in most concretes, improving the performance of concretes for all applications like-
- Ready mix concrete (upto M-60)
- In – situ concrete (upto M-60)
- Pre cost concrete.
- Mass concrete
- Self compacting concrete
POZZOMIX Can be used as a cement replacement, even upto 40% for applications in preparations of-
- Portland pozzolonic cement
- Grouts for anchors.
- Ready plasters, and tile glue
- General purpose mortars
- Foam concrete Etc…
Besides this POZZOMIX finds substantial use in manufacture of pavers & bricks, AAC blocks.
POZZOMIX plays an important role in lowering heat of hydration, thus preventing micro – cracks in the concrete matrix .
POZZOMIX is a boon – in residential / commercial tower projects & infrastructure project like construction of
- Highways .
- Ports
- Airports
- Tunnels
- Power plants and so on.
You can contact by clicking here for a commercial offer.
POZZOMIX Is packed in 1.4 MT jumbo bags OR in small bags of 20/30/40 kg capacity- Supplied in containers load basis.
Addition of RAZON POZZOMIX to concrete as a replacement of cement does not affect ultimate strengths of concretes, however early strengths (3rd day 7th day) are slightly lower. This can be offset by addition of RAZON ACC 313- which is used at a dosage of 200 ml / 50 kg cementations material added to your concrete batching station. The addition of ACC 313 improves 24 hours, 3 day & 7 day strength substantially as compared to those mixes without addition of AAC 313.
Razon AAC 313 is not highly alkaline, it is free of chlorides and nitrates. It is safe for use in concretes containing steel reinforcements. It is the latest of generation strength accelerator for concretes. It does not largely effect the setting time of concretes .
| Test Name | Test Results | Requirements as per ASTMC618 |
| SiO2 + Al2O3 + Fe2O3 % | 88.59 | 70 Min. |
| Silica as SiO2 % | 55.93 | N.S. |
| Alumina as Al2O3 % | 24.65 | N.S. |
| Iron as Fe2O3% | 8.01 | N.S. |
| Titanium as TiO2% | 1.11 | N.S. |
| Calcium as CaO % | 6.15 | N.S. |
| Magnesium as MgO % | 1.88 | N.S. |
| Sodium as Na2O % | 1.92 | N.S. |
| Potassium as K2O % | 1.10 | N.S. |
| Sulphates as SO3% | 0.25 | 5 Max. |
| Retention on 45 Micron Sieve % | 12.69 | 34 Max. |
| Phosphorus as P2O5 % | 0.35 | N.S. |
| Chloride as Cl % | Less than 0.10 | N.S. |
| Moisture as MOI % | 0.57 | N.S. |
| Loss on Ignition % | 0.55 | 6 Max. |
| Products Pages | Product | Contact us | Sector | ||
– Products– Contact us– Sector |
– Admixtures– Construction Sealants
– Bonding Aids & Agents |
RAZON HOUSE, 660, TABOOT STREET,
|
 |