Rubberised
Sealer is rubberised-polymer formulation.
Due to
presence of
fine fibers
it is non-sagging and can
hold firm
if applied
up to a thickness of 10 mm. It is black in colour. Excellent
bonding to
m.s. aluminium
sheets , asbestos
cement sheet ,
concrete , all construction
materials, wood etc.
APPLICATIONS AND METHOD OF USE
For
sealing holes and
cracks in
asbestos cement
sheet, sealing annular space
in C.I. and asbestos cement pipe
joints , asbestos
gutter , for
sealing cracks
in concrete ,
joints in aluminium
sheets for providing water tight seal to galvanised pipe threaded joints etc.
Clean
cracks thoroughly.
Do not
attempt to
widen the
cracks. However clean the cracks thoroughly with wire brush. The surface must be
free of oil, and dry.
Use a
palti or spatula. Fill the cracks with Rubberized Sealer. In case of deep
cracks, pressing Rubberised Sealer with fingers ensures maximum penetration.
Allow 24 hours curing. Make up shrinkage if any by
cleaning the
surface and
apply Rubberised Sealer
till it is in level with surrounding surface. Multi layer exhibits better
life.
Use
kerosene, ordinary paint, thinner or turpentine for cleaning brushes, tools,
hands.
Considering
triangular cracks section of X mm
width and Y mm height of cracks, Length, filled per kgs of Rubberised Sealer.
|
Width
of crack X mm |
Height of crack Ymm |
||
|
|
5mm |
7.5mm
|
10mm
|
|
5mm
|
66M |
44M |
33M |
|
7.5mm |
44M |
29M |
22M
|
|
10mm |
27M |
18M |
13M |
Sealing
cracks with
Rubberised Sealer
followed by
two coats of
Rubberised-Instant-Water-Proofer increase life of sealant treatment. The coating
may merely cover the
crack &
be strip type Thorough
cleaning is a must for coating & sealant filling.
For
sealing G.I.
pipe joints ,
apply Rubberised Sealer over
threaded portion, tie `coir’, or `Lak’, screw socket, bend, or elbow as
usual, tighten completely.
Packing: 200
gm, ˝ kgs, 1.5 kgs, 5 kgs, 50 kgs packs.
NO |
PRODUCT – DATA |
|
|
1 |
Adhesion
to glass, ceramics asbestos, aluminium, wood, cement, construction
materials. |
Excellent. |
|
2 |
Elasticity
after complete setting. |
Can
elongate upto 5% - 10% its length. |
|
3 |
Thermal
stability. |
Excellent
from 0°- 80° C. |
|
4 |
Resistance
U.V. radiation. |
Good. |
|
5 |
Life |
3-5 years
. Greater
life is observed if application is multilayered, or overcoated with RIWPC. |
|
6
|
Application |
To seal
crevices on terraces, chajjas, parapet walls, between masonry & wood,
A.C.sheets, metals, aluminium sheets, bus body. |
|
7 |
Solvent/Diluent |
Thinner-1,
mineral turpentine, ordinary paint thinner. |
OTHER PRODUCTS:
Coatings:
1)
Rubberised Instant Water Proofer 2)
White Water Proofer
3) Damp Proofer
4)
Polyurethane Coating
5) Clear Water Proofer
6) Coal Tar Epoxy
Sealents:
1) Crack
Seal
2) Rubberised Sealents
3) Insta Set -600
Admixtures:
1) Super
Plasticizers 2) Accelerators
3) Retardex
4) Integral Water Proofer
5) Intrair [A.E.A.]
6) Master Plaster 7) Rapid
Grout 8)
Anchorex
9)
Hycrete RJ- 608 10) Block Maker
11) Toughcrete 12) Brick
Master
13) Tile
Master
14) Pipe Master
15) SLP 16)
PL-256
17) Block
Master
Other Products:
1)
Strextra NSG-110
2) P.A.Bound
3) P.A.Mortar
4) Shutter Coat
5)
Floor Repairs Mortars 6) RZ-ED
Mortar 7) Special Grouting system
8) Tile Fix #1
9) Tile
Joint Sealer
10) Instant Plugging Mortars 12)
Easy Grout 13)
Pipe Joint Sealer
Attention: