Rubberised-Instant-Water-Proofer
is rubberised formulation of
brushable consistency
black in colour. It is most
economical coating.
APPLICATION AND METHOD OF USE:-
1]
For waterproofing
of asbestos
cement sheets , A.C.
gutters, for asbestos cement water tanks,
basements, swimming pool etc. any water retaining structure.
2]
For metal,
ferrocrete water
tanks, concrete
tanks, being
anti-algae it is most suited
for water proofing of water tanks.
3]
Water proofing of terrace, chajjas, parapet walls, sunken slabs etc.
Before
treating surface with
Rubberised-Instant-Water-Proofer clean the surface thoroughly, remove all
previous coating ;
preferably scrub
the surface
with wire brush and wipe the surface with a dry cloth. This procedure
ensures surface that is to receive the coating is firm, and dust free.
Apply one
coat of
Clear Water Proofer. Ensure
surface is totally dry, free of dust, grease, Oil, loose particles when
applying Clear Water
Proofer. Allow 8 hours for curing. Treatment with Clear Water Proofer is optional.
Seal
all cracks and crevices with
Rubberized Sealer, fill crevices and cracks with Rubberised Sealer, scrap off
excess material around the cracks
and over the surface. Allow 24 hours curing. If shrinkage is observed,
apply Rubberised Sealer and level
with surrounding surface. Either apply Rubberised Sealer by hard or use
spatula for best results.
On totally
clean dust free surface apply first coat of
Rubberised-Instant-Water-Proofer. Allow
8 hours curing. Apply second coat. If the first coat is along the breadth, the
second coat should preferably be along the length. Cross coating ensures
best results.
Use 5%
thinner-1 for dilution. Use kerosene, mineral turpentine for cleaning brushes
and hands.
Rubberised-Instant-Water-Proofer
may be applied on damp surface. However it
should not be water logged. On
surfaces exhibiting deep penetration of water within the surface blowtorch may
be used to dry the surface initially for best results.
Coverage
50-60 sq.feet per litre depending on type of surface. Second
coat always
offers greater
coverage.
N.B.
1]
Store the material in cool dry place.
2]
Stir the contents well before use.
3]
Keep the product well sealed after use.
4]
Allow copious ventilation when coating and avoid smoking.
Packing:
½ ltr, 1 ltr, 4 ltr, 20 ltr containers.
NO
|
PRODUCT - DATA |
|
|
1 |
Adhesion to cement mortar
,metal, cement
sheets, wood, glass,
concrete, other
construction
materials.
|
Excellent |
|
2 |
Resistance
to UV radiation |
Good |
|
3 |
Resistance
to water head |
Upto
8 Meter of water head |
|
4 |
Film
thickness |
40-50
mils. |
|
5 |
Coverage |
40-45
sq. ft./coat on reasonably smooth surface. |
|
6 |
Abrasion
resistance |
Poor |
|
7 |
Absorption
coefficient U,V, |
0.68 |
|
8 |
Absorption
coefficient U,V, coated with silver coat |
0.25 |
|
9 |
Elasticity
5° to 55° Celsius |
Excellent |
|
10 |
Resistance
to algae & fungus growth underwater |
Good |
|
11 |
Life
under tropical climatic conditions |
3-5 year
& more if Silver Coat treatment is applied. |
|
12 |
Life under
arid climatic conditions |
3 years
max. life increased to 5 years if coated with Silver Coat |
|
13 |
Life
under heavy rainfall areas
|
3
years max if Clear Water Proofer primer is
applied. Treatment must be over completely dry surface. Silver Coat
essential if ambient temperature upto 35°- 48° Celsius. |
|
14 |
Acid
resistance |
Nil |
|
15 |
Alkali
resistance |
Nil |
|
16 |
Solvent |
Thinner
–1, or mineral turpentine, ordinary paint thinner |
|
17 |
Test
Report |
Available
I.S. 3085-1965. |
Attention:
It is strongly recommended that site trials be conducted using site conditions and available raw materials to evaluate the product. Since site materials and conditions are beyond our control and since above suggestions and recommendations are based on our site trials, laboratory product evaluation & trials, and since methods of use at site are beyond our control. Hence, no guarantee is either implied or enforceable.