660, Taboot Street, P.O.Box 49, Pune 411001 [India] Ph: 6130791 Telefax:
6130017
DAMP PROOFER
Damp
Proofer is most suitable for coating on external and internal walls. It forms a
firm, adherent
elastic film preventing ingression of water. For internal walls it forms a breathable film, hence
eliminating
unpleasant damp patch over the walls.
Application:
Remove all existing treatments. Scrub surface with wire
brush to remove all loose material dust
etc. Damp Proofer must be applied on oil/grease free, dust
free, clean & firm surface for best
results.
Fill all cracks with Crack Seal. Avoid widening of cracks.
Press Crack Seal into the cracks either
with a spatula if the surface is smooth or mere pressing it
with fingers will ensures adequate
penetration of Crack Seal into the crack. Allow 24 hours for
the Crack Seal to cure.
Stir the contents of Damp Proofer. 15-10% clean water as
diluent may be added if required. Scrub
surface well with wire brush before application.
Particularly for external surfaces, to ensure
firm bonding of surface. Apply first coat. Allow 8 hours
curing. Apply 2nd coat.
For interior application should palti filling be required
mix china whitening with Damp Proofer
for spatula filling. Allow 24 hours for drying, Sand paper
it to obtain fine smooth finish.
Apply two coats of Damp Proofer. Use universal stainers to
obtain desired shade. This can form
final coat, and is brush applied or roller coated. No
overcoat is necessary with enamel paint, or
other acrylic coats.
For external coatings, apply two coats as suggested above.
Use Crack Seal for sealing cracks.
Damp Proofer has good adhesion to cement paint.
Coverage:
50 to
70 sq.ft. per litre depending on the type of surface.
Packing: 50 Ltr, 25 Ltr, 5 Ltr, 1 Ltr, ½ Ltr packing available.
| NO |
PRODUCT - DATA |
|
| 1 |
Adhesion
to Cement mortar, wood, Asbestos cement sheet, all Construction materials. |
Excellent |
| 2 | Resistance to U,V, radiation | Excellent |
| 3 | Resistance to water head |
Poor,
Cannot be used in water logged
Regions. Best Performance on walls, slopes Etc. |
| 4 | Film thickness | 40 – 50 mils |
| 5 | Coverage | 50-70 sq.ft. per ltr. per coat |
| 6 | Abrasion resistance | Poor |
| 7 | Elasticity - 5° Celsius to 55° Celsius | Good |
| 8 | Resistance to algae and fungi | Good |
| 9 | Life under tropical climatic conditions | 3-5 years or more |
| 10 | Life under arid climatic conditions | 3-5 years or more |
| 11 | Life under heavy rainfall areas | 3 –5 years |
| 12 | Acid resistance | Nil |
| 13 | Alkali resistance | Nil |
| 14 | Typical application |
Damp
Proofer is used for Wall
treatments i.e. on walls, Parapet walls, chajjas etc. |
| 15 | Solvent/ Diluents | Clean Water |
|
OTHER PRODUCTS: Coatings: 1)
Rubberised Instant WaterProofer
2) White Water Proofer
3) Damp Proofer 4)
Polyurethane Coating
5) Clear Water Proofer
6) Coal Tar Epoxy Sealents: 1) Crack
Seal 2)
Rubberised Sealents
3) Instaset – 600 Admixtures: 1) Super Plasticizers 2) Accelerators 3) Retardex 4) Integral Water Proofer 5) Intriar [A.E.A.] 6)
Master Plaster 7) Rapid
Grout
8) Anchorex 9) Hycrete
RJ- 608
10) Block Master 11) Toughcrete
12) Brick Master 13) Tile
Master
14) Pipe Master 15)
SLP
16) PL-256 Other Products: 1) Non
Shrink Grout
2) P.A.Bound
3) P.A.Mortar
4) Repellant
5) Floor
Repairs Mortars 7) RZ-ED Mortar 8)
Special Grouting system
9) Easy Grout 10)
Concrete Cure Coating 11)
Tile Joint Sealer 12)
Tile Fix #1 13) Pipe Joint Sealer 14)
Instant Plugging Mortars
14) Shutter Coat. |
Attention
:
It is strongly recommended that site trials be
conducted using site conditions and available raw materials to evaluate the
product. Since site materials and conditions are beyond our control and since above suggestion and recommendations are based on
our site trials and laboratory
product evaluation & trials, and since methods of use at site are beyond our
control. Hence no guarantee is either implied or enforceable.