RAZON ENGINEERING COMPANY PRIVATE LIMITED

660, Taboot Street, P.O.Box 49, Pune 411001 [India] Ph: 6130791 Telefax: 020-6130017

Clear Water Proofer is light Amber coloured, having transparent features on application. It is most suitable for application on stone masonry walls, archeological structures, to protect surface against acid rains. It forms an impermeable barrier. It is also recommended as primer coat for Rubberised- Instant-Water-Proofer and White-Water-Proofer since it ensures high bond features.

For best results, scrub the surface well with wire brush to remove all algae, fungus, and loose materials from the surface. Clean surface with cloth to remove all dust. It is imperative that surface is oil & grease free, free of dust & loose particles. Immediately coat with Clear Water Proofer. If Clear Water Proofer is intended to be applied as final treatment, two coats are recommended at 8-10 hours interval. Cross coating yields best results. Ensure surface is throughly dry when Clear Water Proofer is being applied.

In case of crevices if the crevices are small, run brush vertically over the crevices so that liberal quantity of Clear Water Proofer penetrates into the crevices, seals & plugs the crevices. For large crevices, it is imperative to seal the crevices before applying final Waterproof Coating. Use our Instaset-600 to fill the cracks. Cure for 3/4 days. Allow 3-4 days for drying. On thoroughly dry clean surface apply Clear Water Proofer.

On profusely leaking terrace, where Rubberised-Instant-Water-Proofer is intended to be used as water proofing treatment on R.C.C., it is recommended that Clear Water Proofer be applied as primer coat.

Clean surface thoroughly, apply one coat of Clear Water Proofer, and allow 8/12 hours curing. Seal all cracks with Joint Sealer, allow 8/12 hours for curing, Apply two coats of Rubberised-Instant-Water-Proofer., Apply one coat Silver coat.

Clean surface thoroughly , Apply one coat Clear Water Proofer, allow 8/12 hours curing. Seal all cracks with Crack Seal. Allow 8/12 hours curing. Apply two coats White-Water-Proofer.

Ensure ample ventilation when Clear Water Proofer is being applied. Do not allow smoking. Keep container covered when Clear Water Proofer is being applied. Use Thinner-2 or N.C. Thinner for dilution & brush cleaning.

NO	PRODUCT - DATA
1	Adhesion to cement mortar, Asbestos Cement sheet, metal glass all building Materials.	Excellent
2	Resistance to U.V. radiation	Excellent
3	Re Resistance to water head	Good
4	Film thickness	35 – 40 mils
5	Coverage	70-80 sq.ft/ ltr./ Coat
6	Abrasion resistance	Fair
7	Elasticity - 5° to 55° Celsius	Excellent
8	Resistance to Algae & Fungus	Good, can be improved if Treated with repellent
9	Life under tropical climatic Conditions	3 – 5 years
10	Life under arid climatic conditions	3 –5 year max
11	Life under heavy rainfall areas	3 –5 year
12	Acid resistance, Alkaline resistance	Resistant to mild acids & alkalis
13	Best Uses:	For external wall coating, particular for stone masonry, archeological structures for waterproofing and protection against external elements Pharmaceutical units, etc.
14	Constituent	40-50 % Solids
15	Thinner/ solvent	Thinner-2, Xylene N.C. thinner
16	Test Results	Available I.S. 3085 - 1965

Attention: It is strongly recommended that site trials be conducted using site conditions and available raw materials to evaluate the product. Since site materials and conditions are beyond our control and since above suggestions and recommendations are based on our site trials, laboratory product evaluation & trials, and since methods of use at site is beyond our control. Hence no guarantee is either implied or enforceable.