For
Footings: IWSP 101
is highly plasticizing very high impermeability coefficient admixture. IWSP 101
is also good for high bond to re-bars.
For
Foundation & Footings:
Coal Tar Epoxy Coating, non
degradable, unaffected by microbial and bacterial fouling, acid alkaline
resistant coating for every kind of protection to concrete & steel
reinforcements.
Super
Plasticizer: For high
workability mortar at reduced water cement ratio. Ensures consistently high
early strength, and high ultimate strength.
Toughcrete:
For Hard, wear resistant abrasion resistant flooring for highways, runways, etc.
P.A.
Mortar:
For emergency repairs, instant setting, high strength, easy to apply, ideal for
heavy traffic bridges or railway bridges where constant vibrations loosen the
repair mortar. Also available underwater version.
Epoxy
Coats: Available in
different shades, concrete & steel compatible, for protection of concrete
surface against erosion, salt-water corrosion etc.
Metal
Clean: For de-rusting degreasing, de-scaling of steel re-bars and for total
passivation by phosphating for protection of re-bars against any kind of
corrosion.
Concrete
Cure Coating:
Coating for concrete, eliminates curing ensures complete un-interrupted
hydration and full strength.
Shutter
Coat:
Available for use on metal shuttering and wooden shuttering, ensures clean
concrete surface, enhances life of shuttering material particularly for wooden
shuttering, saves cement in plastering, ensures smooth concrete flow when
pouring concrete.
Super
Plasticizer cum Retarder: Excellent
admixture for highway concreting, controlled air entrainment
ensures high freeze thaw resistance, high abrasion resistance, tough and durable
concrete.
Railway
Bridges: For railway bridges, where high frequency railway traffic and high
vibrations make impossible repairs without halting traffic. Use of P.A. Mortar
TH-4 ensures speedy repairs, no curing necessary, sufficient strength developed
in 3 – 4 hours.
Anchorex:
Gunniting
admixture for instant grab bonding in gunniting applications.
Our
P.A. Mortar and P.A. Mortar Slurry is most ideal for any kind of instant and
permanent
repairs
to Railway bridges.
For
canal lining our special admixture I.W.S.P 101 is recommended. It eliminates
segregation and bleeding, it ensures high concrete consistency and homogenity,
ensures uniform and homogenous concrete on medium to high inclined slope
concreting. Ensures high impermeability coefficient most essential for canal.
Generally
for canal lining Concrete Cure Coating ensures complete moisture retention for
uninterrupted uniform and complete concrete hydration. No curing necessary at
all. Optimum
reflectivity
of heat and U.V. radiation to ensure complete concrete potential strength.
Ensures economy and speedy work completion. It is 65% cheaper than water curing.