Gram:
RAZON, E-mail: razonengg@usa.net, Website: www.razonengg.com
P.A.MORTAR
SLURRY S-21
P.A. Mortar
Slurry is polyamide formulation
comprising of
factory prepared
mortar, hardner
and P.A. Thinner.
P.A. Mortar
Slurry is found most
usefu l for treating
R.C.C. members
in concast
steel plants, or protection of
bridge piers ,
repairs to
aqueducts , tunnels ,
basements etc.
Factory floorings
in pharmaceutical industries,
food & beverages manufacturing plants, sugar plants, chemical
factories, electrical industries, etc.
P.A. Mortar
Slurry is
also used
extensively in
ware houses ,
godowns for
storage of
corrosive chemicals like
urea etc,
to protect side walls, columns and beams, flooring from corrosive effects
of chemicals.
P.A.Mortar
Slurry is
also used
in coating
ware house
flooring, factory flooring, to impart anti skid features.
In sugar
factory boiler
room, in
sugar godown
flooring to protect against
ground water seepage. Interior Exterior surfaces of cooling towers in
thermal power stations, chemical plants, etc. Exterior,
Interior coating
of storage silos in chemical
plants, fertilizer factories etc. Coating of Jettys, ports,
piers, dockyards,
dry docks, shipyards,
submerged structures
in sea water for
protection against saline water corrosion protection against algae &
bacterial fouling.
Instant
repairs to
highways, runways,
factory floorings, etc.
No curing
required, 4 hours strength sufficient to take normal traffic. Coatings on
sewerage treatment plants to resist bacterial fouling.
For
coating on
foundations , footings ,
structures , to
arrest chemical
corrosion due
to saline environment
corrosion etc to arrest further erosion/corrosion.
Surface preparation:
For R.C.C.
& masonry surface, clean surface thoroughly using wire brush, remove all
loose material, algae, fungus, oilgrease etc. Remove Dust completely by cloth
scrubbing.
For de-greasing surface use mild acid, wash area with water & completely dry the surface. For metal surface, use our Metal Clean to degrease derust descale phosphate the surface. Wash surface thoroughly & dry completely.
Application:
Empty
out the hardner contents
completely into the mortar. Mix thoroughly. Having mixed hardner & mortar
well, Add
P.A. Thinner
to this.
Mix well.
Apply this slurry by brush, ensure uniform spread of material over the
surface to be treated.
The mixing
sequence is most vital. Mix hardner to mortar & PA thinner to hardner +
Mortar mix.
Allow
12 hours 24 hours before
applying next coat. P.A. Mortar Slurry requires no external curing. Sets
within 24 hours
to allow
normal traffic,
no shut-downs
or down-time in continuous
process industry.
Packing: 1.5 ltr, 5 ltr, 50 ltr [combined mortar,
hardner & thinner pack].
|
NO |
PRODUCT DATA |
|
|
1 |
Consistency |
Mortar
: Grey paste Hardner
:
Amber liquid P.A.Thinner
: Black fluid. |
|
2 |
Texture |
Dark grey
rough texture after coating provided in accurately measured quantities for
optimum results. |
|
3 |
Shelf life |
1-2 years
if stored in cool dry place in sealed container unmixed. |
|
4 |
Pot life |
1 2
hours after mixing. |
|
5 |
Coverage |
30 40
sq.ft. per 1.5 kgs pack |
|
6 |
Over
coating |
Over coat
after 12-24 hours, more than 2-3 build up coats may be applied depending
on volume, of corrosion / erosion protection desired. |
|
7 |
Abrasion
resistance |
Excellent |
|
8 |
Hydrophobicity
|
Excellent |
|
9 |
Mixing
proprotion |
Mortar,
hardner & tinner are provided in accurately measured quantities. |
OTHER PRODUCTS:
Coatings:
1)
Rubberised Instant WaterProofer
2) White Water Proofer
3) Damp Proofer
4)
Polyurethane Coating
5) Clear Water Proofer
6) Coal Tar Epoxy
Sealents:
1) Crack
Seal
2) Rubberised Sealents
3) Insta Set -600
Admixtures:
1) Super
Plasticizers 2) Accelerators
3) Retardex
4) Integral Water Proofer
5) A.E.A.
6) Master Plaster 7) Rapid Grout 8) Anchorex 9) Hycrete RJ- 608 10) Block Master 11) Toughcrete
12)
Brick Master 13) Tile
Master 14) Pipe Master 15)
SLP 16)
PL-256
Other Products:
1) Strextra
NSG 110 2)
P.A.Bound 3)
P.A.Mortar 4)
Repellant 5)
Shutter Coat
6) Floor Repairs Mortars 7) RZ-ED Mortar 8) Special Grouting system 9) Concrete Cure Coating 10) Tile Joint Sealer
11) Tile Fix #1 12) Instant Plugging Mortars 13) Easy Grout 14) Pipe Joint Sealer
Attention:
: It is strongly recommended that site trials be conducted using site conditions
and available raw materials to evaluate the product. Since site materials and
conditions are beyond our control and since above suggestions are
recommendations are based on our site trials and laboratory products evaluation
& trials, and since methods of use at site are beyond our control. Hence, no
guarantee is either implied or enforceable.