RAZON ENGINERING COMPANY PRIVATE LIMITED

660, Taboot Street, P.O.Box 49, Pune: 411001 [India]. Ph: 6130791 Telefax: 020-6130017

Gram: RAZON, E-mail: razonengg@usa.net,Website: www.razonengg.com

  

EPOXY COATING EC –111

 Two pack, cold curing, air drying epoxy form Important features of Epoxy Coating EC-111 :-

1)      It is resistant to saline water, saline environment & mild chemicals.

2)      Has moderate flexibility.

3)      Good resistance to thermal shocks, hot & cold water.

4)      It is of brushable consistency, can be easily applied by skilled or unskilled painter.

5)      Gives moderate build film in single coat & multiple coats may be applied for additional film thickness, depending on type of protection desired & environment.

6)      Can be coated on M.S.surface, on concrete, wood, stone masonry, A.C. sheets, etc.

 

Applications :-

1)      Since EC-111 has good resistance to mild acids organic & inorganic acid alkali solutions it finds special application as lining materials in water treatment plants effluent treatment plants, sewerage treatment plant etc.

2)      For protection against acid fume corrosion in pickling plants, chemical plants etc.

3)      Coating on Internal/External walls in warehouses storing chemicals.

4)      For protection against saline water corrosion in coastal region.

5)      Bridge pier, aqueducts, marine structures of RCC or metal.

6)      Sea ports, jetties, hydel or thermal power projects, off shore installations, Dry docks, shipyards, bridges.

7)      The corrosion resistance feature makes product invaluable for use in chemical plants, fertilizer units, sugar factories etc.

8)      For floor coating in hospitals, hotels, beverages manufacturing plants, multi storied car parks, etc.

 

Method of use :

Mix resin & hardener which are provided in accurately weighted proportion in separate containers. Mix thoroughly using circular motion to avoid air entrapment & ensure thorough mixing. Allow the mix to mature within 25-30 minutes, & apply by brush. Use 10-15% thinner CTE-Thinner for smooth brush movement if required. Allow 8-12 hours before applying subsequent coat.

 

Surface preparation :

For Metal Surface

Clean metal surface thoroughly by sand blasting to ensure the surface is free of grease, rust, loose & flaky material. On dry, clean, dust free surface apply Epoxy Coating EC – 111 as recommended above. Alternatively scrub surface thoroughly with wire brush to remove dust, scales, rust etc. Our Metal Clean may be used to remove all grease, loose rust flakes etc. Clean surface thoroughly.

 For Concrete Surface

Mud sand blasting before coating Epoxy Coating EC-111. Wire brush scrubbing to remove all loose material, algae-fungus if any. Dust to remove loose dust or before coating with Epoxy Coating EC – 111. If surface is coated with oil, Wash surface with mild acid followed by thorough washing & drying prior to treatment with Epoxy Coating EC – 111.

 

Packings: Factory prepared 2 pack systems in 1 Ltr, 5 Ltr, 25 Ltr  [combined resin & hardner]

 

 

NO

PRODUCT DATA
1 Colour Clear, grey shades, white, red, blue, green.
2 Mixing ratio Empty out entire hardener contents into the resin container.
3 Pot tube of mixing 3 to 6 hours depend on ambient temperatures, lower pot life at higher temperature & higher pot life at low temperature.
4 Method & Application By brush
5 Diluent CTE-Thinner, 10%-15% by volume
6 Shelf life 6-12mts. Unmixed constituents to be stored in cool dry place.
7 Textures Smooth semi gloss coating
8 Over coat Apply subsequent coating after 24 hours.
9 Coverage capacity 5-6 sq.mtrs. per litre.
10 Film thickness 90-120 microns per film/coating or less if thinner is used.
11 Adhesion to concrete, metal, wood, stone, other construction materials Excellent.
12 Resistance to water head 50 metres.
13 Abrasion resistance Good.
14 Resistance to Algae & fungus fouling, bacterial fouling under water Good.
15 Acid alkali resistance Excellent. Resistant to acid & alkaline chemicals.
16 Solvent Thinner – 2, N.C Thinner, Xylene upto 5 – 10% max.
17 Test Report Available, I.S.

  

 Attention: It is strongly recommended that site trials be conducted using site conditions and available raw materials to evaluate the product. Since site materials and conditions are beyond our control and since above suggestions and recommendations are based on our site trials, laboratory product evaluation & trials, and since methods of use at site is beyond our control. Hence, no guarantee can either be implied or enforceable